AK Building Tools

Power Custom Inc.

What our customers say.

Tactical Mag Install

Small Arms Review

Manufacturers

Viewed Products

Clear Viewed List

AK Building Tools

Showing 1 - 6 of 27 Results

Tools for the home builder. Quality builds start at home.

AK-47 Adj. Trigger Guard Rivet Jig

Here is a new version of the trigger guard rivet jig. The rear is adjustable for use with receivers with original rivet spacing plus with Tapco flats. On the front side of the jig there are slots for the mag catch rivet to clear. Once that's done a small c-clamp is used to set the spacing on the front rivets.

He will no longer be making two different versions of rivet head size supports on these jigs. Be sure to buy the right rivets either from me or where other real AK rivets are sold.

These are manufactured by AK-47 Builder.

Online Price

MSRP:

$65.00

Save:

$0.00

Price:

Qty:

AK74 5.45x39 Receiver Flat Top Rail Bent and Trimmed

Here is what Mr. Curtis says.
To use these flats you will need to have a 5mm and 7mm reamer. This will help solve two of the problems with the flats currently on the market. In all there are at least five problems that will be fixed with these flats compared to any offered before.The rails that will come with the flats are pictured below. They have mag stabilizers on both rails to keep the mag from tilting and causing feed problems.

Online Price

MSRP:

$30.00

Save:

$2.01

Price:

Qty:

AK-Builder Flat Bending Die Set

This is what Mr. Curtis says.
The base of this die set is made from a solid piece of steel that starts off at 17lbs and is machined to 14.5lbs. There is a radius at the entrance of the die which takes less pressure to make the bend. In my testing I have bent several flats by just putting the ram in the middle of the punch and pressing the flat straight in without moving the ram down the length of the punch.

Online Price

Price:

Qty:

AZEX PISTOL TRUNNION

Manufactured by AZEX Arms.

Sling swivel is not included.

This is the best pistol trunnion on the market. I've seen the others and there is no comparison in the craftsmanship of these compared to the others. A blind socket for the Uncle Mikes or Fulton Armory QD ball-bearing 360 degree swivel is machined in place.

For the builder that requires the best parts this is an absolute must

Online Price

MSRP:

$59.99

Save:

$0.00

Price:

Qty:

AK74 5.45 Fixed Stock Receiver Flats

The 5.45 AK74 flats are the same as my 7.62 flats except for the magwell opening is smaller to fit the 5.45 magazines. To use these flats you will need to have a 5mm and 7mm reamer. This will help solve two of the problems with the flats currently on the market. In all there are at least five problems that will be fixed with these flats compared to any offered before. The rails that will come with the flats have mag stabilizers on both rails to keep the mag from tilting and causing feed problems. The picture of the rails are from the actual samples and are made from 4130 steel. Yes, I had samples made and tested them before shipping any flats. I bet no other company that sells flats ever went to that much trouble. These were designed from an actual receiver from Romania then during the later runs of rails I switched to the longer length rail like the Bulgarians used.

Online Price

MSRP:

$30.00

Save:

$2.01

Price:

Qty:

Romanian MD63 Underfolder Flats

These are made to work with the Romanian underfolder stocks and will not work with the Polish or Yugo sets. There are a few places that sold the Romanian "G" front end with the Yugo rear trunnion and underfolder stock that are totally different.

The flats are made from 4130 annealed steel and come with rails that have mag stabilizers on both sides like the originals. The right side rail even has the bump on the rail to keep the hammer centered in the receiver.

These only work with the Romanian Trunion.

Online Price

MSRP:

$35.00

Save:

$0.00

Price:

Qty:

Showing 1 - 6 of 27 Results