Power Custom Inc.
What our customers say.
Tactical Mag Install
Small Arms Review
Red Star Arms
Contact Us
Conditions
Check Out
About Us
Grand Masters LLC.

Manufacturers

Viewed Products
Clear Viewed List Clear Viewed List

   AK Building Tools
Showing 13 - 18 of 27 Results
5mm and 7mm reamers

US made 5mm and 7mm reamers for finishing the hammer and trigger holes on my flats. These will ensure that you have perfectly round holes for the axis pins to go through. You will want to run these at a slow speed and use some cutting oil if you have some.

Sold as a pair.

Online Price
MSRP: $25.00
Save: $0.00
Price:

Qty:

AR-15 Style Birdcage Flash Hider

US Made AR-15 Style Birdcage Flash Hider with 14-1 Left Hand Threads.

These are nicely machined parts with a nice finish and count as one part towards your 922r compliance parts count.

Online Price
MSRP: $12.99
Save: $0.00
Price:

Qty:

AK-Builder Rivet Tool

Are you ready for a completely new riveting tool? This is based on Plinker's original riveting jig as well as a modification from another AK gunsmith and upgraded with my own special touches.

The large round ram and the ram arm are made from 4140 alloy steel and heat treated. There is only one ram that presses the rear of the rivet and it is captured so it won't pivot left or right. The ram will reach the rear rivet on the underfolder/sidefolder trunnions.

Online Price
MSRP: $259.99
Save: $0.00
Price:

Qty:

Center Support Sleeve and Rivet Sets

These center supports will be less prone to crushing unlike other center supports made from steel tubing. There is nothing worse than having the center support crush and ruin the dimensions of the top of the receiver.

Online Price
MSRP: $7.99
Save: $0.00
Price:

Qty:

Yugo M70 Center Supports

Yugo M70 Center Supports made from heat treated high carbon steel.

Here is another of my parts for assembling the M70AB1 or AB2 with the bulged front trunnion. This comes with the custom made rivet that is pictured.

Online Price
MSRP: $7.99
Save: $0.00
Price:

Qty:

AK-47 Folding Stock Receiver Reinforcement Plates

The bottom plate is for the Bulgarian/Russian Sidefolders and the top plate is for the Polish style underfoder. These are not needed on the Yugo's unless you aren't using the original pistol grip mounting plate.

This plate welds to the rear lower section of the receiver to strengthen that area when using folding stocks. As shown it is set-up for an underfolder. The bend is in the right spot and not touching the hole so there are not fitting issues.

These will need to be spot welded on the Receiver.

Please choose either Polish Under folder (Same as Hungarian models) or Sidefolding (Russian or Bulgarian models).

You do not need this piece if you are going to use the Tapco Folding Stock.

Online Price
MSRP: $10.00
Save: $0.00
Price:

Qty:

Showing 13 - 18 of 27 Results

Home | Company | Services | Products | Careers | News | Contact Us

Copyright © Red Star Arms Inc.. All rights reserved.